- On October 30, 2019
- 0 Comments
- On September 17, 2019
- 0 Comments
When to Sharpen Hedge Trimmer BladesWhen it comes to sharpening hedge trimmer blades, it's best to do it regularly, rather than wait until they become blunt. You should be able to get about fifty hours of use before they need to be sharpened. This will vary a bit though depending on the type of foliage you're cutting. If the cut becomes ragged and starts to tear at branches, it's time to sharpen the blades.
Safe Work EnvironmentWith any power tool, safety is your first and main concern. The first step is to cut the tool's power source. If you’re working with an electric hedge trimmer, unplug it. If it’s a battery-operated trimmer, remove the battery. With a gas-powered hedge trimmer, take out the spark plug. Now that the trimmer is safe to work with, you’re ready to sharpen those blades. Make sure you have a clear and stable work surface and room to move around. A flat workbench with a vice will make the job easier. And remember: always wear work gloves!
How to Sharpen a Hedge Trimmer with a Mill FileUse a mill file to sharpen the blade by hand. A mill file is a single-cut file with the teeth pointing in the same direction. Always file in the direction of the teeth. If you file against them, you'll blunt the blade. Likewise, if you use a double-cut file, you'll rough up the blades. If your hedge trimmer has two blades, the first step is to align the upper and lower blades. Squeeze them together by hand. If they're not exactly aligned, leverage the head of a screwdriver between the teeth to get them precisely in line. Each tooth has three points to sharpen. The two sides, and the tip. Hold the hedge trimmer in place so the blade can't move while you're working. Using a downward stroke, follow the natural angle of each tooth. At the end of each stroke, lift the file off and repeat. A few strokes with the file ought to be enough. To test your work, run a piece of paper across the newly-sharpened edge. The tooth should cut the paper cleanly and evenly. Filing will create a build-up of shavings at the bottom edge of each tooth. Use a sharpening stone to remove it. Then, finish off the sharpening with a coat of linseed oil to the blade which will help preserve the lifespan of the tool.
Sharpening Hedge Trimmer Blades with a GrinderYou can also use a grinder to sharpen the blades. The process is the same, but there are other factors to consider. Use a clamp to hold the blades firmly against your flat workspace. The grinder is more aggressive and the blade will move too much if not held in place. The grinder will produce sparks, so it's important to wear safety goggles. Also, make sure you're not working near anything flammable. Cloth, gasoline or an open can of turpentine, for example.
Professional Blade SharpeningThe third method of getting your blades sharpened is to take your hedge-trimmer to a professional. You may not get the same sense of self-satisfaction, but it's relatively inexpensive, less hassle, and you'll know the job's been done right.
DIY or Professional Service?It's relatively easy to learn how to sharpen a hedge trimmer. You'll get a sense of independence and accomplishment, and the convenience of not being without your tool. But if you don't have the time, it makes sense to have the blades sharpened professionally. Need hedge trimmers? Stop by to take a look at our complete line of Stihl trimmers.
- On July 10, 2019
- 0 Comments
Don't Stand for Standing Water in Your YardMosquitos breed in standing water; they need it for their eggs to hatch into larva. The pupils that come from these eat some of the organic materials found in standing water until they grow strong enough to fly away from the pond. Over the course of a few days, they will grow into adult mosquitos. Then, they will return to standing water to lay eggs and continue the cycle. The best way to break the mosquito life cycle is to get rid of standing water. Make sure your birdbaths are empty, and that water is constantly flowing in your pool.
Mow Your Lawn and Keep Your Grass LowAnother way to prevent an infestation of mosquitos is to simply maintain your lawn. Keep it mowed and make sure that your grass is cut low. When you neglect your yard maintenance, mosquitos can find perfect breeding grounds within it. Longer grass usually means water is kept in the lawn for longer, after normal rainstorms. In that time, mosquitos will be able to lay their eggs and then grow into adults. Mosquitos also prefer to stay in dark, dreary areas such as between long blades of grass.
Candles Can be Used for More than Nighttime RelaxationMany people enjoy decorating their backyards with tiki torches or candles. When you can light outdoor candles, you can enjoy nighttime fun with friends and family. Yet, these torches and candles can do more than just light your yard up at night. There are candles that release a chemical that repels mosquitos and other insects when they're burned. They make it so you can go out into your yard without getting eaten alive by mosquitos. With these insect-repellent candles, you'll be able to host parties in your backyard without worrying about mosquitos!
Knowing How to Keep Mosquitos Away is Half the BattleIt's not enough to just know how to keep mosquitos away during the summer. You also need to take steps to protect your yard and keep the people in your home safe. Mosquitos can be dangerous insects that spread terrible diseases, so it's vital that you take steps to keep them away! And for the equipment you'll need to manage to your lawn, you can browse our selection here! Our inventory will help you maintain a beautiful lawn and keep infestations away, so that you can spend the summer having fun!
- On June 26, 2019
- 0 Comments
1. Read the Owner's ManualOne of the most important chainsaw tips for safely using a chainsaw is to read the owner's manual. Don't just skim the booklet. Read every word. Each chainsaw is different and it's wise to become well acquainted with yours. The owner's manual will share tips and trick for using a chainsaw safely.
2. Run a Maintenance Check Before Each UseYou should never assume that your chainsaw is ready to go each time you pick it up. For chainsaw safety each time you use the machine, check it over for any possible damage. Whenever you pick up your chainsaw, check that the fuel and oil are topped off, check the filter and plugs often. Keep your saw sharp and clean the chainsaw bar often. Check the chain tension and adjust it if you need it. Inspect the chain brake, catcher, oiler, and throttle lockout. Always follow the manufacturer's directions for which fuel to use and how to mix the fuel ratio. Though these safety checks seem extensive, once you do it a few times, it will only take a few minutes to perform this check that will keep you safe.
3. Wear Suitable Personal Protective EquipmentOne of the most important things you can do when using a chainsaw is to protect your body and face from harm. Suitable personal protective equipment includes eye protection, a hard hat, steel-toe boots, protective gloves, ear defenders and a face mask. Clothing cover ups like chaps are wise to prevent clothing from getting caught in the chainsaw chain.
4. Plan Your CutBefore you turn on your chainsaw, plan the cut you want to do. You should know exactly where the saw's bar will exit. It's imperative that you know where the cut will end. You don't want to sweep through the log into your foot or leg.
5. Get Ready for the KickbackIf you've never used a chainsaw, you might not be prepared for the tool's kickback. This kickback is one of the main causes of injuries related to chainsaw use. Unless you are a professional, choose a chainsaw with auto braking protection. Though these chainsaws won't cut as fast, they give you better control and safety. One of the best ways to avoid kickback is by not cutting anything with the tip of the saw. If you do, the saw can jerk backward right into your body!
Final Word on Chainsaw Safety TipsThere you have it! 5 chainsaw safety tips that will protect you from harm and keep your chainsaw in optimal working condition. Are you ready to shop for your chainsaw? Crescent Avenue Gardens is your Fort Wayne source for all outdoor power equipment. Check out our store hours and visit us today.
- On June 25, 2019
- 0 Comments
1. The Size of Your LawnWhen beginning the search for a new weed wacker, be sure to consider how big your yard is. While corded weed wackers are fairly cheap, they are usually made for smaller lawns. If your lawn is large, you will need to invest in a gas-powered weed wacker. By doing this, you can avoid running out of cord when trying to reach certain places in your yard. Generally, you will need to use two-cycle gas in these types of weed wackers. Trying to use other types of fuel may lead to the machine breaking down. Consulting with the professional you buy your new weed wacker from can help you figure out what type of maintenance it will need to stay functional.
2. Consider the Features a Weed Wacker HasAs you begin to research the various weed wackers on the market, you will notice that they all have different features. With a bit of research, you should have no problem picking out the features that matter the most. Things like easy start system, top-mounted handles and easy to use spooling systems can come in handy. Keep in mind that the more features a weed wacker has, the higher its price tag will be. Paying good money for a product that will be easy to use is well worth it in the long run.
3. The Overall DesignGoing in and getting a firsthand look at the weed wackers at your disposal is a great idea. By doing this, you can find out details about how certain models and brands are designed. Many modern weed wackers feature things like handle adjustments and shoulder straps. The manufacturers of these products now important an ergonomic design is, which is why these features have been added. Actually holding a weed wacker will allow you to see how heavy it is. The last thing you want is to get a weed wacker that will do a number on your back every time you use it.
Working With the Right Weed Wacker Supplier is ImportantThe key to getting a great deal on a high-quality weed wacker is finding the best supplier. Finding out how long a supplier has been in the business and what type of deals they can offer is essential before making this decision. Are you in the market for quality lawn and garden tools? If so, contact us now to find out about the items we have in stock.
- On April 18, 2019
- 0 Comments
Save up to $100 on Lawn MowersDuring our Toro Days sale, you can save up to $100 on lawn mowers and zero-turn mowers.
Toro Timemaster Walk-Behind Mower
- 30" Wide Deck
- Personal Pace with Traction Assist
- 10.00 ft-lb Gross Torque* Briggs & Stratton® 223cc OHV Engine
- Quick Storage Handle
Toro Recycler Walk-Behind Mower
- 22" Wide Deck
- Variable Speed Self Propel with Front Wheel Drive
- Smartstow - saves up to 70% floor space
- 11" Rear High Wheel for uneven terrain
- On April 11, 2019
- 0 Comments
- lawn care tips for spring
1. Maintenance Your MowerHow well would your car run after not starting it for three to six months? After such a long period of non-operation, cars require special care to start up without damaging the engine. Like your car, your lawnmower is basically an engine that you steer. It, too, requires a tuneup after a 3-month sabbatical. Before starting your Spring mowing, change the oil and put in fresh gas. Replace the spark plug and air filter. Remove any dirt and grass you can from the mower. If it's a gas mower, don't turn it upside down to clean the undercarriage. Instead, tilt one side up at a time and scrub with a long-handled, soft-bristled brush. For stuck-on dirt and grass, scrape with a putty knife or hand trowel. Be careful not to get cut by the blade. Speaking of the blade, a dull blade is bad for your grass. Grass heals faster after a clean cut. If your blade is no longer sharp, sharpen or replace it. Or if you want the best tuneup and the longest life for your mower, take it in for professional service.
2. Rake Up ThatchYou most likely removed leaves from the surface of your lawn in fall. But the beginning of spring is the best time for raking up thatch. Lawn thatch is dead grass, leaves, and other organic matter that settle beneath the tips of your grass but above the roots. Less than half an inch of thatch is considered good for your lawn. Half an inch or more will invite pests and disease. Give your lawn a good, deep raking to remove excessive thatch. This is hard on your lawn since it can tear up some of the grassroots. So do this at the start of a growth period when it can recover quickly. This raking also helps you diagnose any matted or compacted spots on your lawn. Matted grass will be effectively broken up by the raking. Compacted spots can be solved by aerating.
3. Test For AcidityA hard winter can lower the pH of your soil, making it too acidic for your lawn to thrive. A good indicator of an acidic lawn is moss growth. Regardless of visible moss growth, it's best to test and be sure. You can find DIY soil pH tests at your local home and garden store. Or take the soil sample into your local county extension. If your lawn is too acidic, carefully apply lime according to the instructions on the product label. If, on the other hand, the pH is too alkaline, add sulfate with a broadcast spreader. After applying the necessary treatment, test the pH again in 30 days.
4. Reseed Bare PatchesIf your lawn's peppered with dog spots or other bare patches, you'll want to reseed them with your type of grass seed. First, flush the area thoroughly with water and rake away any dead grass. Level the spot with fresh soil and sand, if necessary. Add the seed with a slow-release, nitrogen fertilizer and water daily. Don't mow reseeded spots until they grow over two inches. Apply fertilizer again in five weeks.
5. Weed And FeedIt's good you're reseeding in Spring because you'll be fertilizing and weed-spraying your entire lawn anyway. This should be done every Spring and Fall. If you have only a very small amount of weeds to spray and a whole lawn to fertilize, it's best to use separate fertilizer and weeding products on your lawn. This way you aren't overusing herbicides. But, if your yard is full of weeds, or prone to many weeds in Spring/Summer, you'll need to spray the whole thing for weeds anyway. In this case, it's much easier to spray a single application of fertilizer/weed spray combination product. For best results, wait to apply until a couple of weeks after you've started watering so the soil is moist. And mow the lawn before applying.
Follow These Lawn Care Tips For SpringA stitch in time saves nine. Timely lawn care saves you from sweating, cursing, and shaking your fist at the sun while pulling overgrown weeds on the hottest day of summer. For your own sake, follow these lawn care tips for spring. Now read How to Go Green With a Battery Powered Mower.
- On March 28, 2019
- 0 Comments
- lawn equipment
1. Clean It OutStart by cleaning your lawnmower both inside and out. Take out the belt guards and clean out any grass, dirt, rocks, and other debris that has gotten clogged inside. If you're having trouble getting the clippings out of tight nooks and crannies, use a bottle of compressed air. Leaving this debris inside your lawn mower can damage the belts and pulleys. You should also take a rag and a bucket of clean water to scrub dirt and grass from the surface of the mower. You might want to use a hose to get a strong spray of water to help with difficult stains.
2. Clean/Replace the FiltersA dirty fuel filter can make your lawnmower hard to start. On top of that, it can also cause poor fuel economy. Check the owners manual to find out what type of fuel filter you have. Then either clean it if it's not too old or replace it if it has seen better days. You should also check your mower's air filters. If your mower has a foam filter, you can simply wash it off. You might want to install a new filter if your mower uses the paper kind.
3. Sharpen the BladeA dull lawnmower blade can shred the tips of your grass into strips. This can cause your entire lawn to start dying. At the beginning of the season, take the blade out of the lawnmower and spend some time sharpening it. Always take the blade out of the mower before you do this. If you notice any major wear or tear on the blade, it might be time to get a new one.
4. Check the Blade HeightThe height of your lawnmower blade should be about one inch, depending on the type of grass you grow. But setting your blade too low can weaken the roots of your grass and damage the entire lawn.
5. Lubricate the Moving PartsLubricating moving parts will ensure your lawnmower keeps working the way it should. It can also lessen the strain on the mower, which can help it last longer.
6. Examine the TiresBefore tackling that lawn, make sure you examine the mower's tires. Check for small punctures or holes. If you spot any damage, you should replace your tires before you start mowing.
How to Get Your Lawn Equipment Ready for SpringAfter being cooped up in the shed or garage all winter, your lawnmower needs some basic maintenance before you take it to work again. So make sure you follow these tips as you get your lawn equipment ready for spring. Is it time to buy a new lawnmower this year? View our lawn mowers online or stop into our shop to take a look at some of our options!
- On January 15, 2019
- 0 Comments
- Battery Operated Lawn Mower
If you're one of the many Americans who spends a staggering amount of time working on your lawn, you're no stranger to the classic gas-powered lawn mower. If so, you might be a fan of them, but you also might be considering switching it up.
While they're certainly an upgrade from the manual push mowers of old, some of you may be looking for other options. Luckily, our modern world has offered up an alternative in the form of the battery operated lawn mower.
If you've never considered one before, now might be the time to give it a shot. Here are 7 ways you'll benefit from a battery operated lawn mower.
1. Noise Reduction
This one heads up the list for good reason. It's no secret that gas-powered mowers can be a bit loud. That's not necessarily a bad thing, but if you prefer a more toned-down experience, battery mowers are a great solution.
Battery operated lawn mowers operate more or less silently. Not only will you be saving your own ears, you'll be giving the neighbors one less reason to complain.
2. They're Environmentally Friendly
As you might already know, emissions from fossil fuels are a pretty big deal. Unfortunately, for all their benefits, gas-powered mowers do contribute to those emissions somewhat.
A battery operated lawn mower is a great way to go green. Why not help the environment while you perform yard work?
3. Saving Money
It's not hard to figure out how a battery mower will save you money. Gas costs money, and it certainly hasn't gotten any cheaper over the years.
With a battery operated lawn mower, you never have to worry about refueling. Just plug it in when you're done and you're set. On top of saving money, it's just plain convenient.
4. Lighter Weight
Some gas-powered mowers can weigh in a bit on the heavy side. If you've got a lot of ground to cover, pushing one around can become exhausting very fast.
With battery powered mowers, mowing becomes less of a chore. Less bulk and no added weight from gas mean an overall lighter build. If you're tired of breaking your back just to cut the grass, this is your best bet.
5. No Cords
You might think that a better alternative to gas-powered mowers is an electrical one. After all, you never need to recharge them. But you'd be wrong there.
Even though electrical mowers have their own pros and cons, having to deal with a cord while mowing is a hassle and a liability. Spinning blades and electrical cords can be a deadly combination.
Not only that, switching to cordless means more mobility. All in all, battery powered is just a better choice than electrical.
6. Low Maintenance
Refueling, replacing air filters, and changing spark plugs are all a fact of life with gas-powered mowers. Not the case with battery operated lawn mowers. You'll save yourself hours of potential hassle by making the switch.
7. Overall Ease of Use
The combination of everything on this list makes battery powered mowers easier to use all around. With less mechanical parts, lighter weight, and no cords, your maneuverability will greatly increase. At the end of the day, they're just more convenient in pretty much every way.
A Battery Operated Lawn Mower Is Your Best Choice
Considering everything on this list, it should be clear why a battery operated lawn mower should be your next investment. Everyone wants to make life a bit easier, and this is a great way to do that.
Now that you've seen the benefits of battery operated lawn mowers, why not take a look at other helpful lawn care tips? Read on to discover even more about how to make your lawn care a breeze!
- On December 18, 2018
- 0 Comments
- Snow blower
The official first day of Winter is only a few days away. And, although it doesn't look like snow will be in the forecast anytime soon, getting your snow blower ready now will mean it's ready to go when snow does arrive and starts piling up. Taking care of this now also means that if your snow blower happens to not start and need more attention, you'll have time to get it in for service and back before you need it.
Follow these steps to get your snow blower ready for Winter now and you'll be set to clean those snow-covered driveways and sidewalks.
Check and Change the Oil
Any piece of power equipment that has been sitting around unused for the better part of a year should have the oil checked. Even though you use a snow blower far less, the oil still needs to be checked and changed regularly--just like your car.
Most models should have an oil cap right on top of the engine with a dipstick built in. Unscrew the cap and take a look at the oil. If it's a dark black color or looks a little low, it's time for a change. Check your owner's manual for the location of the oil drain plug and the type and quantity of new oil needed.
Take a Look at the Tires
They may not see many miles, but a low tire or one that has dry rotted after months of sitting in your garage can put a real damper on your morning snow cleanup. Before you use your snow blower for the first time this season, carefully inspect all the tires. Then check the air pressure and fill to the manufacturer's specifications.
Give Your Snow Blower a Once-Over
As important as oil and tires are, your snowblower has many other moving parts as well that are subject to a great deal of wear and tear. Before you crank your snow blower up for the first time this season, look the whole unit over thoroughly. Start with the controls and work your way down, looking for signs of damage or built up debris. Anything that seems like it may affect function should be inspected more closely and repaired if needed. Damaged parts could not only affect function but could also be dangerous for the user.
Fill It Up
The last step you'll need to take before clearing the first driveway of the season is to fill the gas tank with fresh fuel. Believe it or not, gasoline does have a shelf life. If stored properly, gas will last for about six months at most.
While gasoline can often be used after the six-month point, your equipment may not function normally and could be damaged by the older fuel. If there's still gas in your blower, drain the tank and add some fresh fuel.
Once your snow blower has been thoroughly checked over and filled with fresh fluids, it should be ready for another season of work.
If your snow blower could use a little extra attention before you crank it up this season or it won't start, contact our service department for help.